@本区规则 清楚了，难度好大呀！

确实需要明确的规范

本指标在同花顺和通达信均可使用。选股时设置 指标线 底部=80就可选出  见底股票。选股时设置  指标线   黑马=50就可选出黑马启动股票。
N:=9;M1:=3;M2:=3;
VAR1:=(HIGH+LOW+CLOSE)/3;
VAR2:=(VAR1-MA(VAR1,14))/(0.015*AVEDEV(VAR1,14));
底部:IF(TROUGHBARS(3,16,1)=0 AND HIGH>LOW+0.04,80,0);
黑马:IF(ZIG(3,22)>REF(ZIG(3,22),1) AND REF(ZIG(3,22),1)<=REF(ZIG(3,22),2) AND REF(ZIG(3,22),2)<=REF(ZIG(3,22),3),50,0);
STICKLINE(底部,80,95,0,0),COLORWHITE;
STICKLINE(底部,50,80,3,0),COLOR3366BB;
STICKLINE(底部,50,80,2,0),COLOR3399CC;
STICKLINE(底部,50,80,1,0),COLOR33CCEE;
STICKLINE(底部,50,80,0.1,0),COLOR33FFFF;
STICKLINE(底部,20,50,5,0),COLOR3366BB;
STICKLINE(底部,20,50,3.3,0),COLOR3399CC;
STICKLINE(底部,20,50,1.6,0),COLOR33CCEE;
STICKLINE(底部,20,50,0.1,0),COLOR33FFFF;
STICKLINE(底部,0,20,7,0),COLOR3366BB;
STICKLINE(底部,0,20,5,0),COLOR3399CC;
STICKLINE(底部,0,20,3,0),COLOR33CCEE;
STICKLINE(底部,0,20,1,0),COLOR33FFFF;
STICKLINE(黑马,50,65,0,0),COLORWHITE;
STICKLINE(黑马,30,50,3,0),COLOR000055;
STICKLINE(黑马,30,50,2,0),COLOR000088;
STICKLINE(黑马,30,50,1,0),COLOR0000BB;
STICKLINE(黑马,30,50,0.1,0),COLOR0000EE;
STICKLINE(黑马,10,30,5,0),COLOR000055;
STICKLINE(黑马,10,30,3.3,0),COLOR000088;
STICKLINE(黑马,10,30,1.6,0),COLOR0000BB;
STICKLINE(黑马,10,30,0.1,0),COLOR0000EE;
STICKLINE(黑马,0,10,7,0),COLOR000055;
STICKLINE(黑马,0,10,5,0),COLOR000088;
STICKLINE(黑马,0,10,3,0),COLOR0000BB;
STICKLINE(黑马,0,10,1,0),COLOR0000EE;
DRAWTEXT(VAR2<-110 AND 底部>0,87,'见底'),COLORYELLOW;
DRAWTEXT(VAR2<-110 AND 黑马>0,57,'黑马出现'),COLORRED;
RSV:=(CLOSE-LLV(LOW,N))/(HHV(HIGH,N)-LLV(LOW,N))*100;
K:SMA(RSV,M1,1),COLORFFBB00,LINETHICK1;
D:SMA(K,M2,1),COLORFF77FF,LINETHICK1;

支持！！！！！

遵守规定，壮大社区

学习是必须得，坚持学习，坚持回复，坚持与老师们沟通交流

@无之极 测试不通过

谢谢楼主的分享，你辛苦了！！！

3.均线粘合
M:=1;
M5:=MA(CLOSE,5);
M10:=MA(CLOSE,10);
M20:=MA(CLOSE,20);
K1:=MAX(MAX(M5,M10),MAX(M10,M20));
K2:=MIN(MIN(M5,M10),MIN(M10,M20));
A:=MAX(M5,MAX(M10,M20))/MIN(M5,MIN(M10,M20))<1+0.01*M;
A1:=(K1/K2-1)<0.005;
A2:=(K1/K2-1)<0.005;
A3:=V>REF(V,1)*1.5 AND V>MA(V,5);
XG:A AND A1 AND A2  AND  A3 ;

M:=1;
M5:=MA(CLOSE,5);
M10:=MA(CLOSE,10);
M20:=MA(CLOSE,20);
K1:=MAX(MAX(M5,M10),MAX(M10,M20));
K2:=MIN(MIN(M5,M10),MIN(M10,M20));
A:=MAX(M5,MAX(M10,M20))/MIN(M5,MIN(M10,M20))<1+0.01*M;
A1:=(K1/K2-1)<0.005;
A2:=(K1/K2-1)<0.005;
A3:=V>REF(V,1)*1.5 AND V>MA(V,5);
XG:A AND A1 AND A2  AND  A3 ;

感谢老师无私精彩分享！辛苦了！

我发了好多的回复，都没显示出来。进来看看。